Genel

Sep 20
1

We have completed the Zambia Project.

Posted by | Genel | No Comments

Under the “Zambia Railway Rehabilitation Project”, we have successfully completed the geodetic studies, aerial lidar and photogrammetric mapping studies, and rail surveying services for the railway line with a length of approximately 1025 km. We would like to thank everyone who contributed to this project..
Dec 30
2

Macedonia Cadastre Administration Visit.

Posted by | Genel | No Comments

Our Colleagues Oğuzhan Candemir and Enes KALPAKOĞLU have visited the Macedonian Cadastre Administration, due to an ongoing railway project in North Macedonia.
Thank you for their hospitality Managers Brankica Stojanovska, Sasho Dimeski and Albion Dalipi who did not spare their help.
Feb 02
1

We’ve completed Ankara 3D Cadastre Project

Posted by | Genel | No Comments

We’ve completed Ankara 3D Cadastre Project

3D city models were produced by using the stereo digitization method with the help of oblique aerial images on an area of approximately 1000 km² covering the cities of Ankara and Kırıkkale.

UVM City GRID software was used in the 3D modeling and texturing works of the project.

Within the scope of the project, the architectural projects of approximately 75 thousand buildings were digitized, made 3D model and exported in CityGML format.

       

 

Dec 11
1

We’ve completed Bartın-Istanbul Power Line Design, Airborne Lidar Mapping Project.

Posted by | Genel | No Comments

It has been decided to use the Airborne Lidar method at the production of the Energy Transmission Line design projects belong to corridor between Bartın and Istanbul cities
Being passing of the project corridor over the frequently wood and forest areas has been influential in the selection of the Airborne lidar method.
The project route is 330 km long.
56 ground control points have been established.
Flight planning was performed as project corridor width of 400 meters and scanning density of 5 points per square meter.

Dec 11
1

We’ve completed Tanzania Railway Design, Airborne Lidar Mapping Project

Posted by | Genel | No Comments

Route maps of railway lines to be constructed between Darussalam and Makutupora cities in Tanzania were produced by BIRLIK MAPPING with the Airborne Lidar Measurement Method.
The first part of the project starts from Dar Es Salaam and continues to Morogoro and the total length is 205 km.
The second part starting from Morogoro and ending in Makutupora has a length of 344 km.
The total length of the project is 549 km.
Totally 134 ground control points was established along whole railway route
In the first part of the project; with Ground Sample Distance of 5 cm and 5 points per square meter laser point density, In the second part of the project; with Ground Sample Distance of 15 cm and 5 points per square meter laser point density, Lidar flights have been performed.
The Map Production of the first section was completed within 60 days period, the second section was completed within 90 days period.
In the end of the Project, the targeted location accuracy was successfully achieved and the projects were delivered to the customer on time.